Design Integrity Status Report
------------------------------

Report File    : D:\CAD\User\Development\CTS-A\CTS-A (PCB - Design Integrity Status Report).txt
Report Written : Thursday, May 09, 2013
Project Path   : D:\CAD\User\Development\CTS-A\CTS-A.prj
Design Path    : D:\CAD\User\Development\CTS-A\CTS-A.pcb
Design Title   : 
Created        : 01/05/2013 19:05:01
Last Saved     : 09/05/2013 16:02:32
Editing Time   : 989 min
Units          : mm (precision 3)

Checking integrity of Schematic and Pcb designs in project "CTS-A".

The PCB and Schematic designs do not match.

To bring them into line, you will need to make the following changes to the PCB design:

Disconnect Pin FS1-1 from Net "N0024"
Disconnect Pin FS1-2 from Net "Live"
Disconnect Pin TB1-1 from Net "Live"
Disconnect Pin TB1-2 from Net "Neutral"
Disconnect Pin TB1-3 from Net "GND"
Disconnect Pin PSU1-1 from Net "Neutral"
Disconnect Pin PSU1-2 from Net "N0025"
Disconnect Pin PSU1-3 from Net "+12V"
Disconnect Pin PSU1-4 from Net "GND"
Disconnect Pin C2-1 from Net "+12V"
Disconnect Pin C2-2 from Net "GND"
Disconnect Pin C1-1 from Net "+12V"
Disconnect Pin C1-2 from Net "GND"
Disconnect Pin NTC-1 from Net "N0024"
Disconnect Pin NTC-2 from Net "N0025"
Disconnect Pin MOV-1 from Net "N0025"
Disconnect Pin MOV-2 from Net "Neutral"

Delete Net "Live"
Delete Net "GND"
Delete Net "+12V"
Delete Net "Neutral"
Delete Net "N0025"

Component 'PD10-20B' package 'MISC' in PCB is newer version than Schematic, use Update Component to correct this.


Change component reference "TB1" to use component "Terminal 3P 5mm", package "MISC" instead of component "Terminal 5mm Large", package "MISC".

Setting sheet name for all components.

Change component reference "C1" to use component "CAPSMF7", package "USER" instead of component "CAP-0P2", package "DSC".

Add value "Value=220uf 25v" to component reference "C1".

Change component reference "C2" to use component "CAP-0P2", package "DSC" instead of component "CAPE8-35", package "USER".

Add value "Value=100n" to component reference "C2".

Add value "Value=5D-9" to component reference "NTC".

Add value "Value=JVR-7N431K" to component reference "MOV".


Add Component "PL1" [2WP]

Add Net "N0013"
Add Net "N0015"
Add Net "N0019"
Add Net "N0023"
Add Net "N0030"

Connect Pin TB1-1 to Net "N0023"
Connect Pin TB1-2 to Net "N0013"
Connect Pin TB1-3 to Net "N0019"
Connect Pin FS1-1 to Net "N0023"
Connect Pin FS1-2 to Net "N0030"
Connect Pin PSU1-1 to Net "N0024"
Connect Pin PSU1-2 to Net "N0013"
Connect Pin PSU1-3 to Net "N0015"
Connect Pin PSU1-4 to Net "N0019"
Connect Pin C1-1 to Net "N0015"
Connect Pin C1-2 to Net "N0019"
Connect Pin C2-1 to Net "N0015"
Connect Pin C2-2 to Net "N0019"
Connect Pin NTC-1 to Net "N0030"
Connect Pin NTC-2 to Net "N0024"
Connect Pin MOV-1 to Net "N0024"
Connect Pin MOV-2 to Net "N0013"
Connect Pin PL1-1 to Net "N0015"
Connect Pin PL1-2 to Net "N0019"


End Of Report.
